TP 347 ASTM A213 Seamless Stainless Steel Tube Suppliers India, ASTM A312, ASTM A249, ASTM A269, ASTM A554, ASTM A213, Seamless Pipe, Welded Pipe, Square Tube, Stainless Steel Tubing Uk,Usa,Uae,Oman,Philippines
Reliant Pipes & Tubes Pvt. Ltd.

TP 347 ASTM A213 Seamless Stainless Steel Tube

ASTM A213 | ASME SA213|A249|A269|A312|A358|ASTM A789/A790 TP 304L TP 347 ASTM A213 Seamless Stainless Steel Tube

TP 347 ASTM A213 Seamless Stainless Steel Tube supplier & Exporter

TP 347 ASTM A213 Seamless Stainless Steel Tube

online TP 347 ASTM A213 Seamless Stainless Steel Tube Price | all size TP 347 ASTM A213 Seamless Stainless Steel Tube | ASTM/DIN/JIS/GOST TP 347 ASTM A213 Seamless Stainless Steel Tube

RELIANT PIPE & TUBES is highly acclaimed manufacturer and exporters of TP 347 ASTM A213 Seamless Stainless Steel Tube

  • TP 347 ASTM A213 Seamless Stainless Steel Tube information

Table Of Content


We offer a wide selection of TP 347 ASTM A213 Seamless Stainless Steel Tube, and a diverse range of finish options to meet the performance and appearance requirements for most applications.Stainless Steel Pipe Stockist in Usa, Canada,UK, Uae,South Korea, Iran,Saudi Arabia, Malaysia, Italy, Singapore, Indonesia, Thailand, Germany,Australia, Turkey, Taiwan, Mexico, Vietnam, Spain, Netherlands, France, Poland, Brazil, Philippines, Japan, Kuwait, India, Philippines, United States,Usa,UK, Pakistan, Saudi Arabia(Ksa), United Arab Emirates(Uae), Indonesia, Sri Lanka, Iran, Hong Kong, Nigeria, Poland, Netherlands, Bahrain, Bangladesh, Belgium, Oman, Malaysia, Kuwait, Qatar, Canada, Argentina, Singapore, Japan, Thailand, Bahrain, Chennai, Gujarat, Mumbai, Turkey, Italy, South Korea | Depot & around the globe.

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Size & Specification

SS 347
Standards Seamless Tube
ASTM A 213
ASME SA 213


Both 347/347H are used primarily in elevated temperature applications.

Product Range

Specifications: ASTM A/ASME SA213, A249, A269, A312, A358 CL. I to V ASTM A789/A790
Sizes (Seamless): 1/2" NB - 24" NB
Sizes (ERW): 1/2" NB - 24" NB
Sizes (EFW): 6" NB - 100" NB  

Wall Thickness available:
Schedule 5S - Schedule XXS (heavier on request)

Other Materials Testing:
NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.

Dimensions:
All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.


Pipe/Tube/Tubing Type NB Sizes Sch 5 Sch 10 Sch 40 Sch 80 Sch 160
TP 347 ASTM A213 Seamless Stainless Steel Tube 1/8″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 1/4″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 3/8″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 1/2″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 3/4″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 1″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 1 1/4″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 1 1/2″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 2″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 2 1/2″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 3″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 4″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 5″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
TP 347 ASTM A213 Seamless Stainless Steel Tube 6″
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube
Available Size Pipe Tube

 

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Available Standards

ASTM Standards: ASTM A312, ASTM A213, ASTM A269, ASTM A376
European Standards: DIN 17456, DIN 17458, EN 10216, EN 10297
Japanese Standards: JIS G 3459, JIS GS3463, GS3467, JIS G3448
Russian Standards: GOST 9940, GOST 9941

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Transport / Freight

We firstly possess a perfectly developed transport by which we can deliver goods directly from the warehouse to the customer. Secondly, we direct traffic, which ensures a delivery from the factory to customers from 15 tons. TP 347 ASTM A213 Seamless Stainless Steel Tube that are not in stock at our own warehouse are based on the star traffic from other sites - every day! We aim at providing professional customer service with one-stop purchasing, along with superior quality control, competitive price, fast lead time and convenient transportation.

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Marking & Packaging

While marking we choose a specific item number as well different color shade to differentiate steel grades. We mark TP 347 ASTM A213 Seamless Stainless Steel Tube as needed with the most suitable & visible marking technique.

TP 347 ASTM A213 Seamless Stainless Steel Tube packaging

We deliver from stock and warehousing as well as directly from the mill.

Packaging is an integral part of the product. It guarantees that the TP 347 ASTM A213 Seamless Stainless Steel Tube is delivered to the customer in the required quality. For smaller orders the size of the TP 347 ASTM A213 Seamless Stainless Steel Tube bundle depends on the no. of Tubes ordered, for larger orders the tubes are packed into individual bundles and in such a way that the maximum weight of 4000kg per bundle is not excedded. Bundle tied down with steel tape. Bundle tied down by steel strap underlaid by tapaten.

We can also provide TP 347 ASTM A213 Seamless Stainless Steel Tube wooden box packing, cardboard boxes, plastic wrapping, using hardened paper with PE meshing (used as protection against mechanical damages of tubes), into tapaten and polyethylene sheet etc.

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Quality & certificate

ISO 9001:2008 Certified companyISO 9001:2008 Certified company

 

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Useful Info

High carbon versions of both alloys are available. These grades have UNS designations S32109 and S34709.

Chemical Composition of 347 Stainless Steel Pipes and Tubes
Represented by ASTM A240 and ASME SA-240 specifications.

 Element 347
Carbon* 0.08
Manganese 2.00
Phosphorus 0.045
Sulfur 0.03
Silicon 0.75
Chromium 17.00-19.00
Nickel 9.00-13.00
Columbium +
Tantalum**
10xC min to 1.00 max
Tantalum --
Titanium** --
Cobalt --
Nitrogen --
Iron Balance


Resistance to Corrosion of 347 Stainless Steel Pipes and Tubes

General Corrosion
Alloys 321 and 347 offer similar resistance to general, overall corrosion as the unstabilized chromium nickels Alloy 304. Heating for long periods of time in the chromium carbide precipitation range may affect the general resistance of Alloys 321 and 347 in severe corrosive media.

In most environments, both alloys will show similar corrosion resistance; however, Alloy 321 in the annealed condition is somewhat less resistant to general corrosion in strongly oxidizing environments than annealed Alloy 347. For this reason, Alloy 347 is preferable for aqueous and other low temperature environments. Exposure in the 8000F to 15000F (4270C to 8160C) temperature range lowers the overall corrosion resistance of Alloy 321 to a much greater extent than Alloy 347. Alloy 347 is used primarily in high temperature applications where high resistance to sensitization is essential, thereby preventing intergranular corrosion at lower temperatures.

Physical Properties of 347 Stainless Steel Pipes and Tubes

The physical properties of Types 321 and 347 are quite similar and, for all practical purposes, may be considered to be the same. The values given in the table may be used to apply to both steels.
When properly annealed, the Alloys 321 and 347 stainless steels consist principally of austenite and carbides of titanium or columbium. Small amounts of ferrite may or may not be present in the microstructure. Small amounts of sigma phase may form during long time exposure in the 10000F to 15000F (5930C to 8160C) temperature range.
The stabilized Alloys 321 and 347 stainless steels are not hardenable by heat treatment.
The overall heat transfer coefficient of metals is determined by factors in addition to thermal conductivity of the metal. In most cases, film coefficients, scaling, and surface conditions are such that not more than 10 to 15% more surface area is required for stainless steels than for other metals having higher thermal conductivity. The ability of stainless steels to maintain clean surfaces often allows better heat transfer than other metals having higher thermal conductivity.

Mechanical Properties of 347 Stainless Steel Pipes and Tubes

Room Temperature Tensile Properties
Minimum mechanical properties of the stabilized Alloys 321 and 347 chromium-nickel grades in the annealed condition (20000F [10930C], air cooled) are shown in the table.
Elevated Temperature Tensile Properties
Typical elevated temperature mechanical properties for Alloys 321 and 347 sheet / strip are shown below. Strength of these stabilized alloys is distinctly higher than that of non-stabilized 304 alloys at temperatures of 10000F (5380C) and above.

High carbon Alloys 321H and 347H (UNS32109 and S34700, respectively) have higher strength at temperatures above 10000F (5370C). ASME maximum allowable design stress data for Alloy 347H reflects the higher strength of this grade in comparison to the lower carbon Alloy 347 grade. The Alloy 321H is not permitted for Section VIII applications and is limited to 8000F (4270C) use temperatures for Section III code applications.

Heat Treatment of 347 Stainless Steel Pipes and Tubes

The annealing temperature range for Alloys 321 and 347 is 1800 to 20000F (928 to 10930C). While the primary purpose of annealing is to obtain softness and high ductility, these steels may also be stress relief annealed within the carbide precipitation range 800 to 15000F (427 to 8160C), without any danger of subsequent intergranular corrosion. Relieving strains by annealing for only a few hours in the 800 to 15000F (427 to 8160C) range will not cause any noticeable lowering in the general corrosion resistance, although prolonged heating within this range does tend to lower the general corrosion resistance to some extent. As emphasized, however, annealing in the 800 to 15000F (427 to 8160C) temperature range does not result in a susceptibility to intergranular attack.For maximum ductility, the higher annealing range of 1800 to 20000F (928 to 10930C) is recommended.

Benefits of 347 Stainless Steel

  • Higher creep stress and rupture properties when compared with 304
  • Ideal for high temperature service
  • Overcomes sensitization and intergranular corrosion concerns
  • Can be used in elevated temperature applications for ASME Boiler and Pressure Vessel Code applications
  • Due to stabilisation the material offers better overall corrosion resistance when compared to 304/304L
  • Excellent mechanical properties
  • A high carbon version (347H) is also available

 

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Price

Stainless Steel Pipe Price

 

  • TP 347 ASTM A213 Seamless Stainless Steel Tube Inventory

Reliable Pipe & Tubes supply TP 347 ASTM A213 Seamless Stainless Steel Tube to

Reliable Pipe & Tubes supply other products to

Seamless & Welded tubes we export to:

  • Terms and Conditions
  • 1. Testing : 100% PMI (Positive Material identification) TP 347 ASTM A213 Seamless Stainless Steel Tube.
  • 2. Payment term : 20% in advance, balance Payment against proforma invoice.
  • 3. Packing & Forwarding : As per your convenience.
  • 4. Note : All our transaction are subject to Mumbai jurisdiction.
  • 5. Rates : Subject to Final Confirmation.

Formula for Good Business

Quality TP 347 ASTM A213 Seamless Stainless Steel Tube + Prompt Service + Better Rates = Customers’ Satisfaction

 Online Inquiry Form


Pipe Price List in India

Pipe Price List in India

Pipe Calculator | Pipe Weight Calculator

Pipe Calculator | Pipe Weight Calculator

We Export to: We Import to: Online Inquiry Form

ASME B36.19 STAINLESS AND NICKEL-ALLOY STEEL PIPES SIZE CHART

ASME B36.19 Pipe Size Chart – pipes weight in kg/meter by pipe NPS and schedule

NPS OD Schedule
Schedule 5S Schedule 10S Schedule 40S Schedule 80S
(mm) (inch) WT / WEIGHT
mm (in) kg/m mm (in) kg/m mm (in) kg/m mm (in) kg/m
1/8 10.3 0.405 1.25 (0.049) 0.28 1.73 (0.068) 0.37 2.42 (0.095) 0.47
1/4 13.7 0.540 1.66 (0.065) 0.49 2.24 (0.088) 0.63 3.03 (0.119) 0.80
3/8 17.2 0.675 1.66 (0.065) 0.63 2.32 (0.091) 0.85 3.20 (0.126) 1.10
1/2 21.3 0.840 1.65 (0.065) 0.81 2.11 (0.083) 1.00 2.77 (0.109) 1.27 3.74 (0.147) 1.62
3/4 26.7 1.050 1.65 (0.065) 1.02 2.11 (0.083) 1.28 2.87 (0.113) 1.68 3.92 (0.154) 2.20
1 33.4 1.315 1.65 (0.065) 1.30 2.77 (0.109) 2.09 3.38 (0.133) 2.50 4.55(0.179) 3.24
1 1/4 42.2 1.660 1.65 (0.065) 1.66 2.77 (0.109) 2.69 3.56 (0.140) 3.39 4.86 (0.191) 4.47
1 1/2 48.3 1.900 1.65 (0.065) 1.91 2.77 (0.109) 3.11 3.69 (0.145) 4.06 5.08 (0.200) 5.41
2 60.3 2.375 1.65 (0.065) 2.40 2.77 (0.109) 3.93 3.92 (0.154) 5.45 5.54 (0.218) 7.49
2 1/2 73.0 2.875 2.11 (0.083) 3.69 3.05 (0.120) 5.26 5.16 (0.203) 8.64 7.01 (0.276) 11.4
3 88.9 3.500 2.11 (0.083) 4.52 3.05 (0.120) 6.46 5.49 (0.216) 11.3 7.62 (0.300) 15.3
3 1/2 101.6 4.000 2.11 (0.083) 5.18 3.05 (0.120) 7.41 5.74 (0.226) 13.6 8.08 (0.318) 18.6
4 114.3 4.500 2.11 (0.083) 5.84 3.05 (0.120) 8.37 6.02 (0.237) 16.1 8.56 (0.337) 22.3
5 141.3 5.563 2.77 (0.109) 9.46 3.41 (0.134) 11.6 6.56 (0.258) 21.8 9.53 (0.375) 31.0
6 168.3 6.625 2.77 (0.109) 11.3 3.41 (0.134) 13.9 7.12 (0.280) 28.3 10.9 (0.432) 42.6
8 219.1 8.625 2.77 (0.109) 14.8 3.76 (0.148) 20.0 8.18 (0.322) 42.5 12.7 (0.500) 64.6
10 273.1 10.750 3.41 (0.134) 22.7 4.20 (0.165) 27.8 9.28 (0.365) 60.4 12.7 (0.500) 81.5
12 323.9 12.750 3.97 (0.156) 31.3 4.58 (0.180) 36.1 9.53 (0.375) 73.9 12.7 (0.500) 97.4

PIPE TOLERANCES

PIPE OUTSIDE DIAMETER TOLERANCE

PIPE NPS/ DN/ OD
Allowed Outside Diameter Tolerance
Over Under
inches mm inches mm
NPS 1/8 to 1½
DN 6 to 40
OD 10.3 to 48.3, mm
1/64 0.4 1/64 0.4
Over 1½ to 4
DN 40 to 100
OD 48.3 to 114.3, mm
1/32 0.8 1/32 0.8
Over 4 to 8
DN 100 to 200
OD 114.3 to 219.1, mm
1/16 1.6 1/32 0.8
Over 8 to 18
DN 200 to 450
OD 219.1 to 457, mm
3/32 2.4 1/32 0.8
Over 18 to 26
DN 450 to 650
OD 457 to 660, mm
1/8 3.2 1/32 0.8

PIPE WALL THICKNESS TOLERANCE

PIPE NPS/ DN/ OD
Tolerance, % from Nominal
Over Under
NPS 1/8 to 2½, incl, all t/D ratios
DN 6 to 65
OD 10.3 to 73.0, mm
20.0 12.5
NPS 3 to 18, incl, t/D up to 5%
DN 80 to 450
OD 88.9 to 457, mm
22.5 12.5
NPS 3 to 18, incl, t/D > 5%
DN 80 to 450
OD 88.9 to 457, mm
15.0 12.5
NPS 20 and larger, incl, welded, all t/D ratios
DN 500
OD 508, mm
17.5 12.5
NPS 20 and larger, incl, seamless, t/D up to 5%
DN 500
OD 508, mm
22.5 12.5
NPS 20 and larger, incl, seamless, t/D > 5%
DN 500
OD 508, mm
15.0 12.

PIPE WEIGHT TOLERANCE

  • Pipes NPS 12 (DN300, 323.8mm) and under, weight tolerance is: -3.5% / +10%.
  • Pipes over NPS 12 (DN300, 323.8mm),weight tolerance is: -5% / +10%.
  • Pipe of NPS 4 (DN100, 114.3mm) and smaller may be weighed in convenient lots; pipe in sizes larger than NPS 4 shall be weighed separately.

PIPE QUANTITY TOLERANCE

Should be within -10% to +10% tolerance, as a rule of thumb (-3/+3% should be acceptable).


Give us a call today to get all the information, +91-22-66310022, If you're looking to buy or sell Stainless Steel Pipe/Tube, we can help., call to our Distributor in India or mail us to info@reliantpipes.com for instant free quote of Stainless Steel Pipe/Tube.

Please feel free to give your inquiry in the form below. we will reply you soon

People Also Search :

SS 304 ASTM A312 Seamless Pipe, SS 304 ASTM A213 Seamless Tube, SS 304 ASTM A312 Welded Pipe, SS 304 ASTM A249 Welded Tube, ASTM A269 Welded & Bright Annealed Stainless Steel Tubing, ASTM A554 T304 Stainless Square Tube, SS 304 Stainless Square Pipe, SS T304 Rectangular Tubing, DIN 2462, JIS G3463 bright 202,301,304 stainless square tube, Astm A312 TP304 Stainless Steel Seamless Pipe, SS 304L ASTM A213 Seamless Tube, SS 304L ASTM A312 Welded Pipe, SS 304L ASTM A249 Welded Tube, ASTM A554 T304L Stainless Square Tube, 304L Stainless Square Pipe

SS T304L Rectangular Tubing, 3" sch 10 T304L Stainless Welded Pipe, SS 310 ASTM A312 Seamless Pipe, SS 310 ASTM A213 Seamless Tube, SS 310 ASTM A312 Welded Pipe, SS 310 ASTM A249 Welded Tube, ASTM A554 T310 Stainless Square Tube, 310 Stainless Square Pipe, SS 310 Rectangular Tubing, ASTM A269 SS Square Pipe & Tubes, SS 310S ASTM A312 Seamless Pipe, SS 310S ASTM A213 Seamless Tube, SS 310S ASTM A312 Welded Pipe, SS 310S ASTM A249 Welded Tube, ASTM A554 T310S Stainless Square Tube, 310S Stainless Square Pipe, SS 310S Rectangular Tubing, SS 316 ASTM A312 Seamless Pipe, SS 316 ASTM A213 Seamless Tube, SS 316 ASTM A312 Welded Pipe, SS 316 ASTM A249 Welded Tube, ASTM A554 T316 Stainless Square Tube, 316 Stainless Square Pipe, SS 316 Rectangular Tubing
SS 316L ASTM A312 Seamless Pipe, SS 316L ASTM A213 Seamless Tube, SS 316L ASTM A312 Welded Pipe, SS 316L ASTM A249 Welded Tube, ASTM A554 T316L Stainless Square Tube, 316L Stainless Square Pipe, SS 316L Rectangular Tubing, SS 317 ASTM A312 Seamless Pipe, SS 317 ASTM A213 Seamless Tube, SS 317 ASTM A312 Welded Pipe, SS 317 ASTM A249 Welded Tube, ASTM A554 T317 Stainless Square Tube, 317 Stainless Square Pipe, SS 317 Rectangular Tubing, SS 317L ASTM A312 Seamless Pipe, SS 317L ASTM A213 Seamless Tube, SS 317L ASTM A312 Welded Pipe, SS 317L ASTM A249 Welded Tube, ASTM A554 T317L Stainless Square Tube, 317L Stainless Square Pipe, SS 317L Rectangular Tubing, SS 321 ASTM A312 Seamless Pipe, SS 321 ASTM A213 Seamless Tube, SS 321 ASTM A312 Welded Pipe, SS 321 ASTM A249 Welded Tube, ASTM A554 T321 Stainless Square Tube, 321 Stainless Square Pipe, SS 321 Rectangular Tubing, SS 321H ASTM A312 Seamless Pipe, SS 321H ASTM A213 Seamless Tube, SS 321H ASTM A312 Welded Pipe, SS 321H ASTM A249 Welded Tube, ASTM A554 T321H Stainless Square Tube, 321H Stainless Square Pipe, SS 321H Rectangular Tubing, SS 347 ASTM A312 Seamless Pipe, SS 347 ASTM A213 Seamless Tube, SS 347 ASTM A312 Welded Pipe, SS 347 ASTM A249 Welded Tube, ASTM A554 T347 Stainless Square Tube, 347 Stainless Square Pipe, SS 347 Rectangular Tubing, SS 347H ASTM A312 Seamless Pipe

Products List